 |
Personal Backup Version 5.9 |
| © 2001 − 2018, Dr. J. Rathlev |
Click the Auto Backup tab to display the selections
for automatic backup. You can start 16 different backup tasks
automatically at various times each with individual settings.
Prior to that, each task must have been
configured and saved.
A click on a region of the screenshot on the right will
lead to help specific for that region:
If at least one of the automatic 16 tasks is activated as time controlled or at logoff,
this box will be checked by the program and the Personal Backup will not be
terminated when closing the main window, but will continue running in the background. The
icon will then be
displayed in the Windows notification area (usually at the bottom right-hand
corner of the screen). Under Windows 7 and newer this icon may initially be hidden, in
which case click the arrow adjacent to the notification area to view all hidden
icons. To show the icon permanently (recommended), click on the icon and drag it from the
hidden list to the notification area.
Furthermore, the program adds a shortcut to the startup folder of the Windows start menu
to be started automatically on next user logon if at least one automatic task
(time-triggered or on logon/logoff) is active. If the user is logged on as administrator
and at least one automatic task is using a Volume Shadow Copy,
in addition the Run as administrator flag of this link will be set.
Left-clicking the icon in the notification area will show a
list of all pending automatic backups,
right-clicking it will call a context menu
from which one of several actions can be initiated (e.g. backup, logoff).
Clicking this checkbox will change the program behavior:
- Checked: The program remains running in the background after closing the main
window even if no time schedule is configured. A backup can be started manually using
the right-click context menu of
the icon.
- Unchecked: All automatic tasks will be temporarily
disabled. If the main window is closed, the program will be terminated. You must
restart the program manually to reactivate the configured automatic tasks.
On clicking one of the buttons 1 through 16, the
name of the backup task and the associated settings for the automatic start
will be displayed.
Beneath are three buttons with the following functions:
 |
|
Add current loaded task for automatic execution:
the task shown in the large center window will replace the selected automatic
task. A new task must be created beforehand and saved to disk as file. |
 |
|
Load task for automatic execution:
select and open the desired task using Windows Explorer.
|
 |
|
Remove task: the selected task
will merely be removed from the list of automatic tasks, not deleted, so
that its configuration can be used again later. |
On clicking the
button,
all details of the task will be displayed in the center window and can be edited.
If you have selected the option Show automatic task instantly in the
Preferences, the task details
will have been displayed immediately after selecting one of the task-number buttons.
There are six different options for starting an automatic
backup, together with the option to disable this:
- Never
- Disable this backup task for automatic execution
- Always on logon
- Each time the user logs onto Windows (or, on single-user systems, starts Windows),
this backup task will be executed. To do this, a shortcut is added to the startup
folder of the Windows start menu. A few seconds after logon (or startup) the program begins this
backup task. The progress bar is
displayed on the screen just as happens after starting manually. The
delay time
between logon (or startup) and backup can be preset by the user.
- Daily on logon
- The program performs the backup as above, but just once per day after the
first logon (or startup). The next backup will then take place after the first
logon (or startup) on the following day.
- Daily at selected time
- The backup will be performed at the specified time on the selected days of
the week. A shortcut is added to the startup folder of the Windows start menu
so that after the user logs on (or starts the computer), the program is launched
automatically. It will remain hidden in the background to perform the backup
at the specified time which will be indicated by a small
icon
displayed in the Windows notification area. If the computer is switched off or is
hibernating at this time, the backup will be caught up on as soon as possible.
- Always on logoff
- The backup task will be started automatically each time when the user logs off
(or shuts the computer down). If the user has previously logged on on the same day,
the backup will only be started after the specified time of day.
This prevents starting backups on multiple logoffs or system-initiated restarts.
If this option is selected, every time after the user logs on (or switches the
computer on), the program is launched automatically but remains hidden except for the
icon displayed in the Windows notification area.
Note: Because there is no way for the program to detect
whether a Windows option such as "Restart" was selected by the user on initiating
shutdown, the program will always perform the action selected for
shutdown in the preferences.
- On first logon
- After the user first logs on (or starts Windows) on the
selected days of the week, the backup will be started.
- On first logoff
- After the user first logs off (or shuts the computer down)
on the selected days of the week, the backup will be started.
If at least one automatic task is activated, the program adds itself to the
Windows startup menu using the command line option /auto.
Note: All these settings will be saved automatically
by the program.
During an automatic backup, by default a window opens displaying the
progress of the backup process. When the
backup has been completed, the window displays the status
of the backup (number of files copied, number of errors).
The drop-down list beneath the Status window contains options permitting you
to control the behavior of this window, including whether a user prompt is to
be opened on serious errors (e.g. destination drive not ready) inviting
the user to resolve the problem.
- Wait for prompt
- During the backup a progress window is displayed.
The status window must be closed by the user. This is the default setting
for backups on logon. If the destination is not ready, the
user will be prompted to switch on the drive or insert a volume.
- Close automatically
- During the backup a progress window is displayed.
The status window will remain visible for a preset period and will then close
automatically. This is the default setting for backups at a set time or on logoff.
The delay can be selected in the preferences dialog under the
View options.
If the destination drive is not ready the user will not be prompted.
- Not visible
- The progress and status windows will not be displayed. Instead, the icon
in the Windows notification area will blink. Clicking this icon will show or
hide the progress window. If the destination drive is not ready the user will
not be prompted
- Wait only on errors
- During the backup a progress window is displayed.
The status window will remain visible if an error occurred. Otherwise it will
be closed automatically after the preset period. If the destination
is not ready, the user will be prompted to switch on the drive or insert a volume.
- Not visible except on errors
- The progress windows will not be displayed (see above). The status window
at the end of a backup will be opened only if errors have occurred. If the
destination drive is not ready the user will not be prompted.
The schedule of the selected automatic backup is displayed in this window.
To change the schedule, click the Settings button.
Recurrence:
In the upper left area (see screenshot), you can select when the destination directory
is to change:
- Never
- No alternating schedule is configured. The backup will always be written
to the same destination directory using the mode determined by the backup task.
- Daily:
- If you select for example 5 steps per cycle, the destination directory will change
each day from BD01 to BD05. After 5 days the sequence is repeated from the
beginning again (BD01).
If one of the daily modes is selected within Start internal automatic backup
(see above), the backup will occur once daily. Otherwise, it will occur on every
logon or on every logoff.
Selecting 7 steps per cycle or a multiple of this, will result in a schedule based
on the days of the week (see below).
- Weekly:
- The destination directories will be BW01, BW02, etc. and the backup will be
carried out as configured (e.g. in Daily on logoff mode) into the respective
destination directory for the current week. On the first possible day of the
following week, usually on the Monday, the destination directory will be changed.
- 1 per week:
- The backup will be carried out as described above, but occurring just once
a week on the first possible day of the week.
Here, you can adjust how many steps per cycle are to be used. If an alternating schedule
has been configured, you will find one subdirectory per step beneath the destination
directory "BDnn" for a daily schedule (nn = current number of step)
or "BWnn" for a weekly schedule (nn = current number of step).
Depending on your selection, the given number
of days or weeks will elapse before the first backup is overwritten.
Daily backups with cycles of 7, 14, 21, .. days are a special case in that the
destination directory will correspond to the day of the week (ISO 8601):
BD01 (08, ..) for Monday, BD02 (09 ,..) for Tuesday, etc.
In this case the day of the week for the first backup can be selected.
The field Current step shows the number of the step currently
valid. If necessary this value can be adjusted by the user (except on cycles bound
to days of the week).
Full backup on
This option is only available if the daily backup cycles are bound to the days of the week
(see above).
You can select the day of the week on which the full backup shall be performed.
Start backup cycle
This option is only available if the daily backup cycles are bound to the days of the week
(see above).
You can select whether the backup cycle shall be started on the day of the week
next scheduled for the full backup or immediately on the same or following day.
This means that the full backup will be caught up automatically at the next scheduled
backup. For example, if the full backup is planned for Monday and the alternating
schedule is newly configured on Thursday to be executed daily at 18:00, the full backup
for Monday will be caught up on the same day at 18:00.
These options are only available when an alternating schedule mode is selected.
You can choose one of the following settings:
- As in task
- The backup mode (Copy, Full (new), Differential or Incremental) is determined
by the selections under the
Task settings tab.
- 1 x As in task + Differential
- The first backup of the schedule is a complete backup using the settings
from the task:
- Copy: All new and changed files fitting to the selections from the
task will be copied to the destination directory (without deleting it
before). Optional a synchronization can be performed. The archive bits of
all copied files will be reset at the source (regardless of the setting in
the task).
- Full (new): All files in the destination folder will first be
deleted and then all selected files will be copied resetting the archive bit.
Succeeding backups will be
carried out using the Differential method, i.e. all files in the destination
folder will first be deleted and then only those files that have the archive
bit set will be copied. The archive bits remains unchanged.
- 1 x As in task + Incremental
- The first (complete) backup of the schedule will be performed as described
above for Differential mode.
Succeeding backups will be carried out using the Incremental method, i.e. all files in
the destination folder will first be deleted and then only those files that
have the archive bit set will be copied. The archive bits will be reset.
If such an incremental backup had already been performed on the current day
(e.g. on multiple logoffs), the files already copied on this day are not
deleted from the destination folder. All newly-changed files are copied
according to their archive bit.
- 2 x As in task + Differential
- In this mode, the selected cycle will be run twice. Two complete
backups will be made (e.g. with 5 steps per cycle, performed as the 1st and 6th step).
All other actions will be as for 1 x As in task + Differential.
- 2 x As in task + Incremental
- This mode is similar to the above except that the Incremental mode is used
for the backups.
Note: If an alternating mode is selected, a letter is appended
to the subdirectories to indicate the backup type: F = full backup,
D = differential backup and I = incremental backup.
You can adjust the priority of the file copying processes with respect to other
applications: if you select "Very low", other running processes will decelerated
less than with the "Normal" setting. If you select "High",
the file copying processes will be given a higher priority, possibly causing
other applications to run more slowly.
Clicking this button will display the schedule of all pending automatic backups.
At the right of this button, you will find information concerning the currently-selected automatic backup task:
- The date and time last run
- The log settings
J. Rathlev, 24222 Schwentinental, Germany, August 2018